High Heat High Density Coke Fuel Carbon Anode Scrap Used In Foundry Or Ceramics Or Metallurgy Industry

Product Advantages We rely on the largest electrolytic aluminium plant so that we can provide you the enough stock, lowest price and the most reliable of quality in the same industry. The carbon anode scrap has the features of high-denisty、high-heat、 long burning time、anthracite etc. Specialized...

Description

Product Advantages
We rely on the largest electrolytic aluminium plant so that we can provide you the enough stock, lowest price and the most reliable of quality in the same industry.
The carbon anode scrap has the features of high-denisty、high-heat、 long burning time、anthracite etc.
Specialized in this lines for many years-- the most reliable supplier.
...
products information
The carbon anode scrap is the remainder of pre-baked anode carbon block after using on the electrolytic tank 18.
Specifications

Size (mm)

FC content %

Sulfer content %

Moisture content %

Ash %

Volatilization %

Heat (kcal)

0-5

85

3

1

14

1.4

6400

5-10

95

2

1

1

1.4

8500

10-30

98

1.8-2

1

1

1.4

8800

30-60

98

1.8-2

<1

<1

1.4

8800

80-150

98

1.8-2

<1

<1

1.4

8800

150-300

98

1.8-2

<1

<1

1.4

8800

200-400

98

1.8-2

<1

<1

1.4

8800

200-600

98

1.8-2

<1

<1

1.4

8800

monoblock

98

1.8-2

<1

<1

1.4

8800

Size as customer's requirements
The factory
We have a enough quantity in stock

When we arrange the goods

We break the goods by Artificial and mechanical crushing

The product details


The denisty is much higher-- the most reliable quality in China.

Main Usage
√As a kind of carbon additive
√Residual pole can be reused in the process of anode material production;
√The anode carbon block as a kind of aggregate in the production of anode paste;
√The carbon anode scrap can be used in foundry industry as a fuel;
Package
In jumbo bags;
In bulk;
As customer's requirements;

Relative knowlage

1, the influnce of residual maximal and the types of baked anode density
The more dense and less material is added when the anode is graded, the higher the volume density of the anode is. This kind of effect is not obvious to the soft remnant, because the corrosion pores of the soft remnant are more.
2, the effect of air permeability of maximal residual anode
This effect is particularly evident when increasing the density of the debris can reduce the permeability of the air and the use of light coke.
3, the effect of soft and hard residue on the mechanical strength of anode
Increasing the amount of hard residual material can improve the bending strength of anode. However, due to the soft matter and residual extremely porous, so do not use in production.
4, the effect of sodium content on the carboxyl group of the anode.
The residual polar circulation, with high content of sodium cryolite form into the carboxylation reaction has a detrimental effect, the effect of sodium sensitivity depends on the size of coke. The effect of residual sodium content is more important to the effective cleaning system of the residue.
5, the residual anode air reactivity on ignition anode
The higher the ignition point of scrap recycling, the remaining amount of air reaction of anode is higher. That hard burning high residual corrosion was minimal in electrolytic tank. On the other hand, soft butts ignited lower due to porous combustion caused by the combustion of CO2 and air in the electrolysis process. In the worst case, the corrosion of the soft remnant particles will be selected in the combustion binder matrix. Due to the heat release of the air combustion reaction, the corrosion is very fast.
In addition to the anode formula will make the soft scrap scrap becomes more soft, light lower (about 3-4, resulting in a vicious spiral) after a cycle of air combustion is more intense (scrap, 10%-30% oxidation) caused by burning and corrosion of steel.

JINYAOLAI is one of the professional high heat high density coke fuel carbon anode scrap used in foundry or ceramics or metallurgy industry manufacturers and suppliers who put great importance to credibility and integrity. There are qualified workers serving for you in 24 hours and timely delivery is also offered. Get the best price high heat high density coke fuel carbon anode scrap used in foundry or ceramics or metallurgy industry from our factory now!

Related Products

Feedback

Products List